TRENDnet Switch TK801R User Manual

Quick Installation Guide  
TK-401R  
TK-801R  
Download from Www.Somanuals.com. All Manuals Search And Do
T
wn
K
lo
-
a
1
d.
601R  
1. Before You Start  
Package Contents  
?
TK-401R/TK-801R/TK-1601R  
Multi-Language Quick Installation Guide  
Rack mount kit  
AC Power Adapter (9V DC, 1A)  
(TK-801R/TK-1601R)  
?
?
?
System Requirements  
?PS/2 Keyboard  
?PS/2 Mouse  
?VGA Compatible Monitor  
?PS/2 KVM cables (e.g. TK-C06, TK-C10, TK-C15)  
?Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, Unix  
 
1
2. How to Install  
1. Turn OFF all computers and their peripherals,  
and then disconnect all power cords.  
2. Connect the shared PS/2 keyboard, monitor,  
and PS/2 mouse to the KVM switch's Console  
Port. (TK-801R shown)  
3. Connect the included AC Power Adapter to the  
KVM switch and then to a power outlet  
(TK-801R /TK-1601R only).  
4. Use the PS/2 KVM cables to connect your PC  
to the KVM switch.  
5. Turn ON the connected computers one-by-one  
and wait until each computer's desktop  
appears.  
PC 1, 2, 3, 4 (TK-401R)  
PC 1, 2, 3, 4, 5, 6, 7, 8 (TK-801R)  
PC 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,  
13, 14, 15, 16 (TK-1601R)  
 
2
Rack Mount  
The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be  
placed in a wiring closet with other equipment.  
Note: If you would like to mount the KVM switch to a EIA 19” equipment rack, install the  
included mounting brackets to the sides of the KVM switch, secure them with the  
screws provided, and then mount the KVM switch to the equipment rack with the  
hardware provided by the equipment rack manufacturer.  
1. Attach the mounting brackets to both sides of  
the KVM switch and secure them with the  
provided screws.  
2. Carefully position the KVM switch onto the rack.  
Align the bracket to the screw holes on the  
rack, then use the screws provided with the  
equipment rack to mount the KVM switch.  
Your installation is now complete.  
Register Your Product  
To ensure the highest level of customer service and support, please take a moment to  
register your product Online at: www.trendnet.com/register  
Thank you for choosing TRENDnet.  
 
3
3. Operation  
Note: To switch between computers, you can use the front-panel push buttons or the  
Hot Key commands.  
LED Indicators  
Red LED light: KVM cable is connected and  
PC is powering the KVM switch.  
Green LED light: Indicates the selected PC  
port is active, whether the computer is turned  
on or off.  
Green LED flash: The selected PC port is in  
scan mode or is not powered by the PC  
Push Buttons  
Press the push buttons to switch between  
computers.  
 
4
Hot Key Commands  
A keyboard hot key command consists of three keystrokes:  
Hot Key command = Scroll Lock + Scroll Lock + Command key(s)  
After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key  
again. You then have another 2 seconds to press a command key. A beep confirms that  
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the  
switch will exit hot key mode.  
To select a specific PC port:  
For TK-401R  
Scroll Lock  
Scroll Lock  
+
+ Y  
Y = Port number 1-4  
For example, to Select Port 1 on the KVM switch you hit the following key sequence  
Scroll Lock  
Scroll Lock  
Scroll Lock  
Scroll Lock  
+
+
+ 1  
For TK-801R/TK-1601R  
+ Y + Z  
Y Z = Port number 01-08 (TK-801R) or Port number 01-16 (TK-160R)  
For example, to select Port 1 or Port 10 on the KVM Switch, you hit the following key  
sequence  
Scroll Lock  
Scroll Lock  
Scroll Lock  
Scroll Lock  
+
+
+ 0 + 1  
+ 1 + 0  
Select Port 1 =  
Select Port 10 =  
For a list of all the Hot Key commands, please see the Quick Reference Sheet.  
 
5
Quick Reference Sheet for TK-401R/801R/1601R  
Front-Panel  
Hot Keys  
Description  
Command  
Buttons  
TK-401R  
Scroll Lock  
Scroll Lock  
+ Y  
+
Press the Push Button  
for a specific port to  
switch to that port  
(Y)= 1-digit port number (1-4)  
TK-801R/TK-1601R  
Select the active  
PC channel  
Select PC  
Scroll Lock + Scroll Lock  
+
Y
+
Z
(YZ)= 2-digit port number (01-16)  
Select the next lower  
PC channel  
- - -  
- - -  
Scroll Lock + Scroll Lock  
Scroll Lock + Scroll Lock  
+
Next lower channel  
Next higher channel  
Select the next higher  
PC channel  
+
Toggle On/Off beep  
sound during Autoscan  
mode  
Autoscan Beep  
Sound On/Off  
- - -  
- - -  
Scroll Lock + Scroll Lock  
Scroll Lock + Scroll Lock  
+
+
B
END  
S
Reset KVM  
Autoscan  
Reset KVM  
Autoscan through  
every connected  
channel for quick  
screen browsing  
of each channel  
- - -  
Scroll Lock + Scroll Lock  
+
Autoscan through  
every connected  
channel for quick  
screen browsing  
of each channel in  
intervals of X  
Autoscan with  
Programmable  
Delay Time  
Scroll Lock + Scroll Lock  
+
S
+
X
- - -  
(X)= 5~99 Seconds  
seconds  
Terminate Autoscan  
activity  
Press any key on keyboard  
Stop Autoscan  
Press any button.  
 
6
Technical Specifications  
TK-401R: 4 computers  
TK-801R: 8 computers  
TK-1601R: 16 computers  
Management  
1 x PS/2 keyboard 6-pin mini din  
1 x PS/2 mouse 6-pin mini din  
1 x VGA HDB15 15-pin  
Console Port Connectors  
(all famale)  
4/8/16 x PS/2 keyboard 6-pin mini din  
4/8/16 x PS/2 mouse 6-pin mini din  
4/8/16 x VGA HDB15 15-pin  
PC Port Connectors  
(all female)  
VGA Resolution  
1920 x 1440  
Push Button and Hot Key Commands  
Link (Green), Active (Red)  
Save and restore  
Port Selection  
LED  
Keyboard State  
Auto-Scan Intervals  
5 ~ 99 seconds  
PS/2 Interface Power  
External AC Power Adapter : 9V DC, 1A (TK-801/TK1601 only)  
Power  
TK-401R: 202 x 104 x 45mm (8.0 x 4.1 x 1.8 in.)  
TK-801R: 407 x 165 x 45mm (16.0 x 6.5 x 1.8in.)  
TK-1601R: 406 x 165 x 85 mm (16.0 x 6.5 x 3.4 in.)  
Dimensions  
TK-401R: 835g (1.84lb.)  
TK-801R: 1.9 kg (4.2 lbs)  
TK-1601R: 2.65 kg (5.85 lbs)  
Weight  
Operating: 0° ~ 40° C (32° ~ 104° F)  
Storage: -20° ~ 60° C (-4° ~ 140° F)  
Temperature  
Humidity  
0% ~ 90% Non-Condensing  
CE and FCC  
Certifications  
 
7
Troubleshooting  
Do I need to use the included external AC adapter?  
It is recommended that you use the included external AC adapter with the TK-801R/  
TK-1601R KVM switch.  
I have the KVM switch connected properly, but my keyboard and mouse don't work.  
Please make sure your PS/2 ports are working properly by testing it with another mouse or  
keyboard. Once you confirm that the PS/2 ports are functional, please reboot your  
computers, and try to use the KVM switch again.  
Can I connect or disconnect the KVM cables while the computers are turned on?  
Yes, you can connect or disconnect the KVM cables while the computers are turned on,  
because the interface is Hot-Pluggable.  
Will the KVM switch restore the keyboard settings between computers?  
Yes, the KVM switch will restore the keyboard settings when switching between computers.  
(i.e.: Cap Lock, Num key, etc.)  
How do I switch from one computer to another with the KVM switch?  
You can switch computers by pressing the Push Buttons on the KVM switch or using the Hot  
Key commands.. Go to Section 3 Operation for more information.  
If you still encounter problems or have any questions regarding the TK-401R/TK-801R/TK-1601R,  
please contact Trendnet's Technical Support Department.  
 
8
Limited Warranty  
TRENDnet warrants its products against defects in material and workmanship, under normal  
use and service, for the following lengths of time from the date of purchase.  
TK-401R/TK-801R/TK-1601R - 2 Years Limited Warranty  
AC/DC Power Adapter, Cooling Fan and Power Supply carry a 1 year limited warranty  
If a product does not operate as warranted during the applicable warranty period, TRENDnet  
shall reserve the right, at its expense, to repair or replace the defective product or part and  
deliver an equivalent product or part to the customer. The repair/replacement unit's warranty  
continues from the original date of purchase. All products that are replaced become the  
property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet  
does not issue refunds or credit. Please contact the point-of-purchase for their return policies.  
TRENDnet shall not be responsible for any software, firmware, information, or memory data of  
customer contained in, stored on, or integrated with any products returned to TRENDnet  
pursuant toany warranty.  
There are no user serviceable parts inside the product. Do not remove or attempt to service the  
product by any unauthorized service center. This warranty is voided if (i) the product has been  
modified or repaired by any unauthorized service center, (ii) the product was subject to accident,  
abuse, or improper use (iii) the product was subject to conditions more severe than those  
specified in themanual.  
Warranty service may be obtained by contacting TRENDnet within the applicable warranty  
period and providing a copy of the dated proof of the purchase. Upon proper submission of  
required documentation a Return Material Authorization (RMA) number will be issued. An RMA  
number is required in order to initiate warranty service support for all TRENDnet products.  
Products that are sent to TRENDnet for RMAservice must have the RMAnumber marked on the  
outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately  
for safe shipment. Customers shipping from outside of the USAand Canada are responsible for  
return shipping fees. Customers shipping from outside of the USA are responsible for custom  
charges, including but not limited to, duty, tax, and other fees.  
 
9
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS  
WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S  
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE  
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,  
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME  
FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION  
MAINTENANCEOR USEOFTRENDNET'SPRODUCTS.  
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND  
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT  
EXIST OR WAS CAUSED BY CUSTOMER'S ORANYTHIRD PERSON'S MISUSE, NEGLECT,  
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR  
MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY  
ACCIDENT, FIRE, LIGHTNING, OROTHERHAZARD.  
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO  
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN  
CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,  
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OFANY KIND, OR FOR LOSS OF REVENUE  
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER  
FINANCIALLOSSARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,  
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE  
POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR,  
REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID,ATTRENDNET'S OPTION.  
THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY  
REMEDYPROVIDEDHEREINSHALLFAILOF ITSESSENTIALPURPOSE.  
Governing Law:This Limited Warranty shall begoverned by the laws ofthestate ofCalifornia.  
SomeTRENDnet products include software code written by third party developers. These codes  
are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License  
("LGPL").  
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for  
the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are  
distributed WITHOUT WARRANTY and are subject to the copyrights of the developers.  
TRENDnet does not provide technical support for these codes. Please go to  
each license.  
PWP05202009v2  
 
10  
Certifications  
This equipment has been tested and found to comply with FCC and CE Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including interference that may  
cause undesired operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you Local  
Authority or Retailer for recycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
ADVERTENCIA  
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón  
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir  
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y  
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.  
 
Product Warranty Registration  
Please take a moment to register your product online.  
 
Copyright ©2009. All Rights Reserved. TRENDnet.  

Telex Intercom System SPS 2001 User Manual
Toshiba Cell Phone G710 User Manual
Toshiba Flat Panel Television 27A46C User Manual
Toshiba Projection Television 57HLX82 User Manual
Tripp Lite Network Cables N201 014 BK User Manual
Victor Technology Calculator 1208 2 Series User Manual
Viking Burner F20921B User Manual
Vizio Car Satellite TV System M321i A2 User Manual
VTech Tablet 80 136850 User Manual
Wayne Water Pump 360516 001 User Manual