ViewSonic Computer Monitor G70m G70mb User Manual

G70m /  
G70mb  
Color Monitor  
User Guide  
Guide de l’utilisateur  
Bedienungsanleitung  
(International Spanish)  
(Italian)  
(Brazilian Portuguese)  
(Swedish)  
(Russian)  
(Polish)  
(Japanese)  
(Trad. Chinese)  
Simp. Chinese)  
(Korean)  
With Plug and Play  
Full 17" (16.0" Diagonal Viewable)  
(Arabic)  
 
CONTENTS  
ForYour Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Getting Started  
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
E
N
G
L
I
S
H
Using the Monitor  
Setting the Timing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Adjusting the Screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Other Information  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Appendix  
Power Cord Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Getting Started  
ViewSonic G70m/G70mb  
2
 
Getting Started  
Congratulations on your purchase of a Graphics Series ViewSonic G70m/  
G70mb color monitor. Important! Save the original box and all packing  
material for future shipping needs.  
NOTE: This product was designed for operation in the magnetic fields of the  
hemisphere where it was purchased. Also, the word "Windows®" in this user  
guide refers to the following Microsoft® operating systems: Windows '95,  
Windows '98, Windows 2000, Windows NT (4.0).  
E
N
G
L
I
S
H
Package Contents  
Your ViewSonic G70m/G70mb package includes:  
ViewSonic G70m/G70mb monitor  
Setup Guide  
with attached video cable  
ViewSonicWizard CD-ROM  
(incudes User Guide PDF file and  
INF/ICM Display Optimization  
files)  
Power cord  
Audio cable  
Microphone cable  
IMPORTANT: The supplied INF file assures compatibility with Windows  
operating systems, and the ICM file (Image Color Matching) ensures accurate  
on-screen colors. ViewSonic® recommends that you install both files.  
Precautions  
For best viewing conditions sit at  
least 18" from the monitor.  
Choose a well ventilated area to  
position your monitor. Do not place  
anything on the monitor that prevents  
adequate dissipation of heat.  
AVOID TOUCHING THE  
SCREEN WITH YOUR FINGERS.  
Oils from the skin are difficult to  
remove.  
Ensure the area around the monitor is  
clean and free of moisture.  
NEVER REMOVE THE REAR  
COVER. The monitor contains  
high-voltage parts. You may suffer  
serious injury if you touch these  
parts.  
Keep the monitor away from  
magnets, motors, transformers,  
speakers, and televisions.  
Do not place heavy objects on the  
monitor, video cable, or power cord.  
Avoid exposing the monitor to  
direct sunlight or another heat  
source. The monitor should be  
facing away from direct sunlight  
to reduce glare.  
If smoke, abnormal noise, or strange  
odor is present, immediately switch  
the monitor off and call your dealer  
or ViewSonic. It is dangerous to  
continue using the monitor.  
Always handle your monitor with  
care when moving it.  
ViewSonic G70m/G70mb  
Getting Started  
3
 
Quick Installation  
4
Install Display Optimization files  
(continued)  
1
Connect video cable  
Make sure both the monitor and  
computer are powered OFF. Connect  
the video cable to the computer.  
Macintosh® users: Connect a  
Macintosh adapter to the video cable,  
then to the computer. To order a  
Macintosh adapter contact ViewSonic  
(see Customer Support).  
(2) Wait for the CD-ROM to auto-start.  
NOTE: If the CD-ROM does not auto-  
start: double-click on the CD-ROM icon  
in Windows Explorer, then double-click  
on install.exe.  
(3) Follow the on-screen instructions.  
E
N
G
L
I
S
H
5
Audio Installation (optional)  
2
3
Connect power cord  
Speakers: Connect audio cable  
(limecolored cable) to the  
Connect the power cord from a  
properly grounded AC outlet to the  
monitor.  
AUDIO OUT port of your computer's  
sound card, then to the monitor's  
AUDIO IN port (see illustration below).  
Power-ON monitor and computer  
Microphone: Connect audio cable(pink  
colored cable) to the MIC IN port of  
your computer's sound card, then to  
the monitor's MIC OUT port (see  
illustration below).  
Power-ON the monitor, then power-  
ON the computer. This sequence  
(monitor before computer) is very  
important.  
NOTE: At this point Windows® 98  
users may receive a message asking  
them to install the M70/M70Bs INF  
file.  
6
Use the OnView® controls to adjust  
the screen image.  
See Using the Monitor (page 5).  
Installation is complete! Enjoy your  
new G70m/G70mb Monitor!  
4
Install Display Optimization  
files (INF and ICM files)  
To be best prepared for any future  
customer service needs: print this user  
guide and write the serial number in  
For Your Records” on page 1. (See  
back of monitor.)  
(1) Insert the ViewSonic Wizard CD-  
ROM into your computers CD-ROM  
drive.  
NOTE: If your computer does not  
have a CD-ROM drive, see Customer  
Support in this manual.  
To register your product go online to  
Microphone IN  
(side of monitor):  
Connect external  
microphone  
Microphone  
OUT: Connect  
to Mic IN port of  
computer's  
sound card  
Audio OUT  
(side of monitor):  
Connect head-  
phones or external  
speakers  
Audio IN:  
Connect to  
Audio OUT  
port of  
computer's  
sound card  
Video cable  
Power cords  
Wall  
socket  
Getting Started  
ViewSonic G70m/G70mb  
4
 
Using the Monitor  
Setting the Timing Mode  
Setting the timing mode is important for maximizing the quality of the screen  
image and minimizing eye strain. The timing mode consists of the resolution  
(example 1024 x 768) and refresh rate (or vertical frequency--example 75  
Hertz). After setting the timing mode, use the OnView® controls (pages 7-9) to  
adjust the screen image.  
E
N
G
L
I
The recommended timing mode for this monitor is: VESA® 1024 x 768 @ 75Hz  
S
H
To set the Timing Mode:  
1 Set the resolution: Right-click on the Windows® desktop > Properties >  
Settings > Desktop Area > set the resolution.  
2 Set the refresh rate: See your graphic card's user guide for instructions.  
NOTE: To minimize the adjustments required for an optimal screen image,  
select a timing mode from the Preset Timing Modes table below.  
Preset Timing Modes  
VESA 1280 x 1024 @ 60 Hz  
VGA 640 x 400 @ 70Hz  
Macintosh® 640 x 480 @ 67Hz  
Macintosh 832 x 624 @ 74.6Hz  
Macintosh 1024 x 768 @ 75Hz  
VESA 640 x 480 @ 75, 85Hz  
VESA 800 x 600 @ 75Hz  
VESA 800 x 600 @ 85Hz  
VESA 1024 x 768 @ 60, 75, 85Hz  
WARNING: Do NOT set the graphics card in your computer to exceed the  
maximum refresh rate for each resolution (see below). Doing so may result in  
permanent damage to your monitor.  
Maximum Refresh Rates  
1280 x 1024 NI @ 66Hz  
1024 x 768 NI @ 87 Hz  
800 x 600 NI @ 110Hz  
640 x 480 NI @ 120 Hz  
(NI= Non Interlaced)  
Using the Monitor  
5
ViewSonic G70m/G70mb  
 
Adjusting the Screen Image  
To adjust the screen image, follow the instructions in steps  
through ›  
below. You will use the buttons of the Front Control Panel to adjust the  
OnView® controls, which are displayed on the Main Menu (shown below). The  
OnView controls are explained on pages 7-9.  
Internal Microphone  
Main Menu  
E
N
G
L
I
S
H
Front Control Panel  
Increases  
Audio  
Volume  
[M] and [L] scrolls  
up and down Main  
Menu to highlight  
control (or control  
pair)  
Button [2]  
Button [1]  
displays  
Main Menu  
displays  
control screen  
for highlighted  
control  
Decreases  
Audio  
Volume  
Power  
On/Off  
š
[M] and [L]  
decreases or  
increases value  
of the selected  
control  
Muted- Mutes  
Audio Audio  
Light  
Button [1] exits  
Power light:  
control screen or  
Main Menu and  
saves adjustments  
Green = On  
Orange = Power  
Saving  
Mode  
* The monitor automatically degausses each time you turn it on, removing the buildup of magnetic  
fields that can affect color purity and convergence. To prevent possible damage, if you turn the  
monitor off, then immediately on again, wait 20 minutes before doing this again. Do not turn the  
monitor on and off repeatedly. To manually degauss the monitor, see the instructions on page 8.  
6
Using the Monitor  
ViewSonic G70m/G70mb  
 
OnView® Controls  
E
N
G
L
I
S
H
CONTRAST adjusts foreground white level of screen  
image. Press [M] or [L] to adjust.  
BRIGHTNESS adjusts background black level of screen  
image. Press [M] or [L] to adjust.  
ZOOM expands and contracts the entire screen image. Press  
[M] to contract the image, and [L] to expand the image.  
H. POSITION (Horizontal Position) moves screen image  
left or right. [t] moves screen image left, [s] moves screen  
image right.  
H. SIZE (Horizontal Size) adjusts width of screen image.  
[M] decreases width, [L] increases width.  
V. POSITION (Vertical Position) moves screen image up  
and down. [M] moves screen down, [L] moves screen up.  
V. SIZE (Vertical Size) adjusts height of screen image.  
[M] decreases height, [L] increases height.  
PINCUSHION straightens vertical sides of screen image.  
[M] curves vertical edges inward, [L] curves vertical edges  
outward.  
PIN BALANCE curves the screen's vertical edges to the left  
or right. [M] curves vertical edges to left, [L] curves  
vertical edges to right.  
Using the Monitor  
7
ViewSonic G70m/G70mb  
 
To exit the Main Menu & save changes, press button [1].  
TRAPEZOID makes vertical edges of screen image parallel.  
[M]narrows top and widens bottom, [L] widens top and narrows  
bottom.  
PARALLELOGRAM slants vertical edges of screen image to left  
or right. [M] slants vertical edges to left, [L] slants vertical edges to  
right.  
TILT rotates entire screen image. [M] rotates screen image counter-  
E
N
G
L
I
S
H
clockwise. [L] rotates screen image clockwise.  
DEGAUSS There are two ways to degauss the monitor;  
automatically by turning the monitor on, or manually by selecting  
the Degauss control from the OnView Main Menu.  
Important: Do not degauss repeatedly. Doing so can be harmful  
to the monitor. Wait at least 20 minutes (before selecting this  
control again.  
VIEWMATCH® COLOR provides four color adjustment options:  
three preset color temperatures and USER COLOR which allows  
you to adjust red and blue (green is fixed).  
Press [M] or [L] to select one of the three color temperatures  
shown below, then press [2] to activate it. Selecting and activating  
USER COLOR displays the screen shown below.  
NOTE: The factory setting for the monitor is 9300K, the color  
temperature most frequently used in rooms with fluorescent lights.  
From this  
screen,  
press button  
[2] to select  
Red or Blue,  
then press  
[M] or [L] to  
adjust.  
USER COLOR  
8
Using the Monitor  
ViewSonic G70m/G70mb  
 
To exit the OnView® menu & save changes, press button [1].  
V. MOIRE reduces horizontal interference patterns that appear as  
ripples, waves, or unwanted background color textures. Interference  
patterns of this type are most noticeable when viewing images  
having closely spaced lines or finely detailed patterns.  
Press [M] or [L] to minimize interference patterns.  
H. MOIRE reduces vertical interference patterns that appear as  
ripples, waves, or unwanted background color textures. Interference  
patterns of this type are most noticeable when viewing images  
having closely spaced lines or finely detailed patterns.  
Press [M] or [L] to minimize interference patterns.  
E
N
G
L
I
S
H
LANGUAGE allows you to choose from among five languages for  
the OnView menus and adjustment screens; English,  
French, German, Italian, and Spanish. To select a language,  
press button [2]. To exit this screen, press button [1].  
OSD POSITION allows you to move any OnView screen (menu or  
adjustment screen) up, down, left, or right. Press button [2] to  
selectVertical OSD or Horizontal OSD.  
MEMORY RECALL returns adjustments back to factory settings  
only if the monitor is operating in a factory preset mode (page 11).  
Exception: This control does not affect changes made with the  
User color control, which allows you to adjust red, green, and  
blue individually.  
VIEWMETER® displays the frequency signal input (horizontal  
scan and refresh rate) coming from the graphics card in your  
computer.  
NOTE: See your graphics card's user guide for more details.  
Using the Monitor  
9
ViewSonic G70m/G70mb  
 
Other Information  
Specifications  
CRT  
Type  
17" (16.0" viewable diagonal), 100° deflection  
0.23mm (H), 0.13mm (V), 0.27mm (D) dot pitch  
High Contrast, Anti-Glare, Ant-static coating;  
Standard light transmission rate = 46%  
Glass Surface  
Input Signal  
Video  
Sync  
RGB Analog (0.7 Vp-p, 75 ohms)  
HV Separated (TTL),  
E
N
G
L
I
fH: 30-70kHz, fV: 50-120Hz  
Compatibility  
PC  
Up to 1280 x 1024  
Macintosh®*1  
Power Macintosh®, up to 1024 x 768  
S
H
Maximum Refresh  
Rates*2  
1280 x 1024 @ 66 Hz  
1024 x 768 @ 87 Hz  
800 x 600 @ 110Hz  
640 x 480 @ 120 Hz  
Power  
Voltage  
AC 100-240V 50/60 Hz  
3 Watts (x2)  
Audio  
Front Speakers  
Connectors  
Input Signal  
Power  
15 pin mini D-sub  
3-pin plub (IEC320)  
Display Area  
Default  
Full Scan  
310mm (H) x230mm (V) (Typical)  
320mm (H) x 240mm (V) (Depends on signal timing)  
Operating  
Conditions  
Temperature  
Humidity  
Altitude  
32°F to 140°F (0°C to 40°C)  
5% to 95% (no condensation)  
To 10,000 feet  
Storage  
Conditions  
Temperature  
Humidity  
Altitude  
-40°F to +140°F (-40°C to +60°C)  
5% to 95% (no condensation)  
To 40,000 feet  
Dimensions  
Physical  
(monitor)  
405mm (W) x 421mm (H) x 418.5mm (D)  
15.9" (W) x 16.6" (H) x 16.5" (D)  
Weight  
Net  
12.0 kgs (26.4 lbs) (monitor only)  
Regulations  
UL, cUL, DHHS, DOC-B, TUV/GS, ISO9241-3,  
DOC-B, NOM, TUV/GS, VCCI, BSMI, S-Mark,  
C-tick, Energy Star®, E2000, PCT, CCIB/CCEE,  
MPRII, TCO 99 (G70m) / TCO 95 (G70mb), Nemko,  
Semko, Demko, FImko, B Mark, CE (for European  
models only), EN 60950:1992, VCCI, CB  
Power saving  
modes  
On  
DPMSTM Stand By  
DPMS Suspend  
DPMS Off  
<100W typical (green LED)  
<15W (orange LED)  
<15W (orange LED)  
<3W (orange LED)  
Preset Timing Modes (the monitor has been pre-adjusted to VESA® 800x600 @ 75Hz)  
VESA 1280 x 1024 @ 60 Hz  
VGA 640 x 400 @ 70 Hz  
Macintosh® 640 x 480 @ 67 Hz  
Macintosh® 832 x 624 @ 74.6 Hz  
Macintosh® 1024 x 768 @ 75 Hz  
VESA 640 x 480 @ 75 Hz, 85 Hz  
VESA 800 x 600 @ 75 Hz, 85 Hz  
VESA 1024 x 768 @ 60,75, 85 Hz  
1
2
*
*
A Macintosh computer requires a ViewSonic® Macintosh adapter. To order adapter, contact customer  
support. See the back cover of manual. You will need to provide the serial number on your monitor.  
Warning: Do not set the graphics card in your computer to exceed these maximum refresh rates.  
Doing so may result in permanent damage to the monitor.  
Other Information  
ViewSonic G70m/G70mb  
10  
E3-G70m.p65  
10  
1/25/01, 7:08 PM  
 
Troubleshooting  
No power  
Make sure power button (or switch) is ON.  
Make sure A/C power cord is securely connected to the back of the monitor and to a  
power outlet.  
Plug another electrical device (like a radio) into the power outlet to verify that the  
outlet is supplying proper voltage.  
Power on but no screen image  
E
N
G
L
I
S
H
Make sure the video cable supplied with the monitor is tightly secured to the video  
output port on the back of the computer. If the other end of the video cable is not  
attached permanently to the monitor, tightly secure it to the monitor.  
Adjust brightness and contrast.  
Check this user's guide to see if an adapter is required for proper signal continuity  
between graphics card and monitor.  
Flickering  
Not enough power supplied. Connect the monitor to a different outlet. If using a surge  
protector, reduce the number of devices plugged in.  
Check the ViewMeter® from the main menu (page 9) to verify the refresh rate (vertical  
frequency) is 75 Hz or higher. See Specifications.  
Make sure the graphics card in your computer can use non-interlaced mode at the  
desired frequencies. To enable your graphics card to support higher refresh rates, try  
selecting fewer colors or running lower resolutions.  
Remove any devices from the area around the monitor that emits magnetic fields such  
as radios, surge protectors, unshielded speakers, fluorescent lights, AC power  
converters, desk fans, etc.  
Wrong or abnormal colors  
If any colors (red, green, or blue) are missing, check the video cable to make sure it is  
securely connected. Loose or broken pins in the cable connector could cause an  
improper connection.  
Connect the monitor to another computer.  
Select Degauss from the Main Menu. Do this only once.  
If you have an older graphics card, contact ViewSonic® Customer Support for a non-  
DDC adapter.  
Entire screen image (rolls) vertically  
Make sure video input signals are within the monitor's specified frequency range.  
Try the monitor with another power source, graphics card, or computer system.  
Connect the video cable securely.  
Control buttons do not work  
Press only one button at a time.  
ViewSonic G70m/G70mb  
Other Information  
11  
E3-G70m.p65  
11  
1/25/01, 4:10 PM  
 
Customer Support (English)  
For the most expedient answer to your question, do the following:  
1 Check Troubleshooting (on the previous page).  
2 For assistance contact your reseller.  
3 For further assistance see the contact infomation listed below.  
If contact information for your country or region is not listed below, ask  
your reseller to refer you to a service center.  
E
N
G
L
I
S
H
NOTE:You will need to provide the serial number (on the back of the product).  
Country/Region  
United States  
Canada  
T =Telephone; F = Fax  
Email  
T: (800) 688-6688  
F: (909) 468-1202  
T: (800) 688-6688  
F: (909) 468-1202  
United Kingdom  
T: 0800 833 648  
--------------------------  
F: 0044 (0)1293 643910  
Europe, Middle East,  
Baltic countries, and  
North Africa  
T: 0044 (0)1293 643900 --------------------------  
F: 0044 (0)1293 643910  
Australia  
(contact reseller)  
------------------------  
New Zealand  
T: 64- 3 - 366-1135  
F: 64-3-366-7006  
Singapore/Southeast T: 65-273-4018  
viewsonicspore@  
pacifc.net.sg  
Asia  
F: 65-273-1566  
Other Asia/Pacific  
T: 886-2-2248-4072  
countries and Indian  
Peninsula  
F: 886-2-2240-8238  
South Africa  
T: 27-11-314-0002  
F: 27-11-314-0002  
Other Information  
ViewSonic G70m/G70mb  
12  
E3-G70m.p65  
12  
1/25/01, 4:10 PM  
 
Cleaning the Monitor  
MAKE SURE THE MONITOR IS TURNED OFF.  
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN  
OR CASE.  
To clean the screen  
1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and  
other particles.  
E
N
G
L
I
S
H
2 If still not clean, apply a small amount of non-ammonia, non-alcohol  
based glass cleaner onto a clean, soft, lint-free cloth, and wipe the  
screen.  
To clean the case  
1 Use a soft, dry cloth.  
2 If still not clean, apply a small amount of a non-ammonia, non-alcohol  
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then  
wipe the surface.  
DISCLAIMER  
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the  
monitor screen or case. Some chemical cleaners have been reported to damage the screen and/  
or case of the monitor.ViewSonic will not be liable for damage resulting from use of any  
ammonia or alcohol-based cleaners.  
ViewSonic G70m/G70mb  
Other Information  
13  
E3-G70m.p65  
13  
1/25/01, 4:10 PM  
 
LIMITED WARRANTY  
VIEWSONIC MONITORS  
What the warranty covers:  
ViewSonic® warrants its products to be free from defects in material and workmanship during the  
warranty period. If a product proves to be defective in material or workmanship during the warranty  
period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement  
product or parts may include remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic color monitors, including the display tubes, are warranted for three (3) years for all parts  
and three (3) years for all labor from the date of the first consumer purchase.  
E
N
G
L
I
S
H
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Any damage of the product due to shipment.  
d. Removal or installation of the product.  
e. Causes external to the product, such as electrical power fluctuations or failure.  
f. Use of supplies or parts not meeting ViewSonics specifications.  
g. Normal wear and tear.  
h. Any other cause which does not relate to a product defect.  
3. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support.  
You will need to provide your product's serial number.  
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b)  
your name, (c) your address, (d) a description of the problem, and (e) the serial number of the  
product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service  
center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
THERE ARE NOWARRANTIES, EXPRESS OR IMPLIED,WHICH EXTEND BEYONDTHE DESCRIPTION  
CONTAINED HEREIN INCLUDINGTHE IMPLIEDWARRANTY OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE.  
Exclusion of damages:  
VIEWSONIC'S LIABILITY IS LIMITED TOTHE COST OF REPAIR OR REPLACEMENT OFTHE  
PRODUCT.VIEWSONIC SHALL NOT BE LIABLE FOR:  
1. DAMAGETO OTHER PROPERTY CAUSED BY ANY DEFECTS INTHE PRODUCT, DAMAGES BASED  
UPON INCONVENIENCE, LOSS OF USE OFTHE PRODUCT, LOSS OF TIME, LOSS OF PROFITS,  
LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCEWITH BUSINESS  
RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OFTHE POSSIBILITY OF  
SUCH DAMAGES.  
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.  
3. ANY CLAIM AGAINSTTHE CUSTOMER BY ANY OTHER PARTY.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from state  
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of  
incidental or consequential damages, so the above limitations and exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,  
contact ViewSonic or your local ViewSonic dealer.  
ViewSonic Monitor Warranty (V2.0)  
Other Information  
Release Date: 10-15-1999  
ViewSonic G70m/G70mb  
14  
E3-G70m.p65  
14  
1/25/01, 4:10 PM  
 
Appendix  
Power Cord Safety Guidelines  
CAUTION: Use a power cable that is properly grounded. Always use the AC cords listed for each  
country.  
Switzerland ................SEV  
Britain .........................BASEC/BS  
Japan .........................Electric Appliance  
Control Act  
USA ...........................UL  
Canada ......................CSA  
Germany ....................VDE  
In other areas, use AC cord which meets local safety standards.  
E
N
G
L
I
S
H
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM  
FORYOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.  
IFTHE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THENTHE PLUG SHOULD BE  
CUT OFF AND DISPOSED OF SAFELY.  
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN  
APPROPRIATE SOCKET.  
If a new plug is to be fitted, please observe the wiring code as shown below.  
If in any doubt, please consult a qualified electrician.  
WARNING: THIS APPLIANCE MUST BE EARTHED.  
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:  
Green-and-Yellow:  
Blue:  
Brown:  
Earth  
Neutral  
Live  
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the  
terminals in your plug, proceed as follows:  
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the  
letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.  
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or  
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked  
with the letter L or coloured RED.  
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION  
The power cord set for this unit has been enclosed and has been selected according to the country of  
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary  
to replace the original cord set, or if the cord set is not enclosed.  
The female receptacle of the cord set must meet CEE-22 requirements and will look like (Figure 1 below):  
Figure 1  
For the United States and Canada  
In the United States and Canada the male plug is a NEMA5-15 style (Figure 2), UL Listed, and CSA  
Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For  
units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected  
according to the current rating for your unit. Please consult Table A below for the selection criteria for  
power cords used in the United States and Canada.  
Figure 2  
For European Countries  
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord  
set is HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of  
one of the inner conductors.  
If you have any questions concerning which proper power cord to use, please consult with the dealer  
from whom you have purchased your ViewPanel.  
Table A  
CordType  
Size of Conductors In Cord  
Maximum Current Rating of Unit  
SJT  
18AWG  
16AWG  
14AWG  
10Amps  
12Amps  
12Amps  
SVT  
18AWG  
17AWG  
10Amps  
12Amps  
ViewSonic G70m/G70mb  
Appendix  
15  
E4-G70m.p65  
15  
1/25/01, 4:13 PM  
 
FCC Information  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation.This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
E
N
G
L
I
S
H
FCC Warning:  
To assure continued FCC compliance,the user must use grounded power supply cord and the  
provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be  
used, use only a shielded BNC(5) cable. Also, any unauthorized changes or modifications not  
expressly approved by the party responsible for compliance could void the user's authority to  
operate this device.  
Power Supply Cord (USA)  
For units with 100 - 120V input voltage in the USA, use the following :  
UL Listed and CSA CertifiedType SVT or SJT No.18/3 AWG rated 125Vac 7 A min.  
One end terminated in a molded on parallel blade, grounding attachment cap or hooded attachment cap  
(15A, 125V configuration), other end terminated in a mold-on appliance coupler.  
Notice for Germany  
The x-rays generated in this unit are shielded sufficiently.High voltage:Max.30 kV.Also, for ergonomic reasons, we  
recommend that you do not display blue characters on a dark background. Doing so may produce insufficient contrast that  
could lead to eye strain.  
Notice for Japan  
This is a Class B product based on the standard of theVoluntary Control Council for Interference from Information Technology  
Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio  
interference. Install and use the equipment according to the instruction manual.  
CE Conformity (For European models only)  
The device complies with the requirements of the EEC directive 89/336/EEC as  
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic  
compatibility”,and73/23/EECasamendedby93/68/EECArt.13withregardtoSafety”.  
Appendix  
ViewSonic G70m/G70mb  
16  
E4-G70m.p65  
16  
1/25/01, 7:14 PM  
 
ViewSonic® Corporation  
381 Brea Canyon Road  
Walnut, CA 91789  
Tel (909) 869-7976  
Tel (800) 688-6688  
Fax (909) 468-1202  
 

Timex Clock T150 User Manual
Timex Clock T256 User Manual
Toshiba Projector 3LCD User Manual
TRENDnet Network Router TW100 BRV304 User Manual
Tripp Lite Network Cables S510 003 User Manual
UNICOM Electric Switch SmartGST 2402 User Manual
Uniden Pager ALP 9060 User Manual
Vertical Communications Telephone GCA70 313 User Manual
VistaQuest Digital Camera VQ3015 User Manual
VocoPro Music Mixer DA 2050K User Manual