ViewSonic Computer Monitor VA912 User Manual

®
ViewSonic  
VA912  
LCD Display  
 
TCO Information  
Congratulations!  
You have just purchased a TCO’99 approved and labelled product!  
Your choice has provided you with a product developed for  
professional use. Your purchase has also contributed to reducing the  
burden on the environment and also to the further development of  
environmentally adapted electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for encouraging  
the adaptation of goods and services to the environment. With the growing manufacture and  
usage of electronic equipment throughout the world, there is a recognized concern for the  
materials and substances used by electronic products with regards to their eventual recycling  
and disposal. By proper selection of these materials and substances, the impact on the  
environment can be minimized.  
There are also other characteristics of a computer, such as energy consumption levels, that are  
important from the viewpoints of both the work (internal) and natural (external) environments.  
Electronic equipment in offices is often left running continuously, resulting in unnecessary  
consumption of large amounts of energy and additional power generation. From the standpoint  
of carbon dioxide emissions alone, it is vital to save energy.  
What does labelling involve?  
The product meets the requirements for the TCO’99 scheme which provides for international  
and environmental labelling of personal computers and/or displays. The labelling scheme was  
developed as a joint effort by the TCO (The Swedish Confederation of Professional  
Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation)  
and Statens Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: ecology, ergonomics, emission of  
electrical and magnetical fields, energy consumption and electrical safety.  
Ecological criteria impose restrictions on the presence and use of heavy metals, brominated  
and chlorinated flame retardants, and other substances. The product must be prepared for  
recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS  
registered.  
Energy requirements include a demand that the system unit and/or display, after a certain  
period of inactivity, shall reduce its power consumption to a lower level in one or more stages.  
The length of time to reactivate the system unit shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of the  
reduction of electrical and magnetical fields as well as work load and visual ergonomics.  
ViewSonic VA912  
i
 
Below you will find a brief summary of the ecological requirements met by this product. The  
complete ecological criteria document can be found at TCO Development’s website  
TCO Development  
SE-114 94 STOCKHOLM, Sweden  
Fax: +46 8 782 92 07  
Information regarding TCO’99 approved and labelled products may also be obtained at  
Ecological requirements  
Flame retardants  
Flame retardants may be present in printed wiring board laminates, cables, and housings. Their  
purpose is to prevent, or at least to delay the spread of fire. Up to 30% by weight of the plastic  
in a computer casing can consist of flame retardant substances. Many flame retardants contain  
bromine or chlorine, and these flame retardants are chemically related to PCBs  
(polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the  
PCBs are suspected of giving rise to health effects, including reproductive damage in fish-  
eating birds and mammals, due to the bio-accumulative* processes when not disposed of in  
accordance with strict standards for disposal.  
TCO’99 requires that plastic components weighing more than 25 grams shall not contain flame  
retardants with organically bound bromine or chlorine. Flame retardants are allowed in the  
printed wiring board laminates due to the lack of commercially available alternatives.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain  
computer displays. TCO’99 requires that batteries, the colour-generating layers of display  
screens, and the electrical or electronics components shall not contain any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. TCO’99 requires that batteries  
shall not contain any mercury. It also demands that mercury is not present in any of the  
electrical or electronics components associated with the labelled unit. There is however one  
exception. Mercury is, for the time being, permitted in the back light system of flat panel  
monitors as there today is no commercially available alternative. TCO aims on removing this  
exception when a mercury free alternative is available.  
Lead**  
Lead can be found in picture tubes, display screens, solders and capacitors. TCO’99 permits  
the use of lead due to the lack of commercially available alternatives, but in future  
requirements TCO Development aims at restricting the use of lead.  
* Bio-accumulative is defined as substances which accumulate in living organisms.  
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.  
ViewSonic VA912  
ii  
 
Compliance Information  
For U.S.A.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses, and can radiate radio frequency energy, and if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
FCC Warning  
To assure continued FCC compliance, the user must use grounded power supply cord and the  
cables which are included with the equipment or specified. Also, any unauthorized changes or  
modifications not expressly approved by the party responsible for compliance could void the  
user's authority to operate this device.  
For Canada  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations.  
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le  
matériel brouilleur du Canada.  
For European Countries  
CE Conformity  
The device complies with the requirements of the EEC directive 89/336/EEC as  
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic  
compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to  
“Safety.”  
User Information for all Countries  
Notice: Use the cables which are included with the unit or specified.  
ViewSonic VA912  
1
 
Important Safety Instructions  
1. Read these instructions completely before using the equipment.  
2. Keep these instructions in a safe place.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this equipment near water.  
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in  
this guide for further instructions.  
7. Do not block any ventilation openings. Install the equipment in accordance with the  
manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other  
devices (including amplifiers) that produce heat.  
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other. A grounding type  
plug has two blades and a third grounding prong. The wide blade and the third prong are  
provided for your safety. If the plug does not fit into your outlet, consult an electrician for  
replacement of the outlet.  
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the  
point where if emerges from the equipment. Be sure that the power outlet is located near  
the equipment so that it is easily accessible.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or  
sold with the equipment. When a cart is used, use caution when moving the cart/  
equipment combination to avoid injury from tipping over.  
13. Unplug this equipment when it will be unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Service is required when the unit has  
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid  
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if  
the unit does not operate normally or has been dropped.  
ViewSonic VA912  
2
 
Copyright Information  
Copyright © ViewSonic® Corporation, 2005. All rights reserved.  
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.  
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of  
Microsoft Corporation in the United States and other countries.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered  
trademarks of ViewSonic Corporation.  
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and  
DDC are trademarks of VESA.  
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).  
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product meets  
the ENERGY STAR® guidelines for energy efficiency.  
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or  
omissions contained herein; nor for incidental or consequential damages resulting from  
furnishing this material, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right  
to change product specifications without notice. Information in this document may change  
without notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any  
purpose without prior written permission from ViewSonic Corporation.  
Product Registration  
To meet your future needs, and to receive any additional product information as it becomes  
available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic  
Wizard CD-ROM also provides an opportunity for you to print the registration form, which  
you may mail or fax to ViewSonic.  
For Your Records  
Product Name:  
VA912  
ViewSonic 19” LCD Display  
VS10696  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
VA912-2_UG_ENG Rev. 1B 05-05-05  
______________________________  
______________________________  
Product disposal at end of product life  
ViewSonic is concerned about the preservation of our environment. Please dispose of this  
product properly at the end of its useful life. For TCO'03 recycling information, please refer to  
our website:  
3. Taiwan: recycle.epa.gov.tw  
ViewSonic VA912  
3
 
Getting Started  
Congratulations on your purchase of a ViewSonic® LCD display.  
Important! Save the original box and all packing material for future shipping needs.  
NOTE: The word “Windows” in this user guide refers to the following Microsoft operating  
systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000, Windows Me  
(Millennium), and Windows XP.  
Package Contents  
Your LCD display package includes:  
• LCD display  
• Power cord  
• AC/DC power adapter  
• Audio cable (stereo mini jack)  
• Video cable  
• ViewSonic Wizard CD-ROM  
• Quick Start Guide  
NOTE: The CD includes the User Guide PDF files and INF/ICM display optimization files.  
The INF file ensures compatibility with Windows operating systems, and the ICM file (Image  
Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install  
both the INF and ICM files.  
Precautions  
• Sit at least 18” from the LCD display.  
• Place the LCD display in a well ventilated  
area. Do not place anything on the LCD  
display that prevents heat dissipation.  
Avoid touching the screen. Skin oils are  
difficult to remove.  
• Ensure the area around the LCD display is  
clean and free of moisture.  
Never remove the rear cover. This LCD  
display contains high-voltage parts. You  
may be seriously injured if you touch  
them.  
• Do not place heavy objects on the LCD  
display, video cable, or power cord.  
• Avoid exposing the LCD display to direct  
sunlight or another heat source. Orient the  
LCD display away from direct sunlight to  
reduce glare.  
• If smoke, an abnormal noise, or a strange  
odor is present, immediately switch the  
LCD display off and call your dealer or  
ViewSonic. It is dangerous to continue  
using the LCD display.  
• Always handle the LCD display with care  
when moving it.  
• Do not rub or apply pressure to the LCD  
panel, as it may permanently damage the  
screen.  
ViewSonic VA912  
4
 
Quick Installation  
1. Connect power cord (and AC/DC  
adapter if required)  
• Wait for the CD-ROM to auto-start.  
NOTE: If the CD-ROM does not auto-  
start: double-click on the CD-ROM icon in  
the Windows Explorer, then double-click  
on viewsonic.exe.  
2. Connect video cable  
• Make sure both the LCD display and  
computer are turned OFF  
• Follow the OSD instructions.  
• Remove rear panel covers if necessary  
5. Windows users: Set the timing mode  
(resolution and refresh rate)  
• Connect the video cable from the LCD  
display to the computer  
Example: 1280 x 1024 @ 60 Hz.  
Macintosh users: Models older than G3  
require a Macintosh adapter. Attach the  
adapter to the computer and plug the video  
For instructions on changing the resolution  
and refresh rate, see the graphics card’s  
user guide.  
cable into the adapter.  
Installation is complete. Enjoy your new  
ViewSonic LCD display.  
®
To order a ViewSonic Macintosh adapter,  
contact ViewSonic Customer Support.  
To be best prepared for any future  
customer service needs: print this user  
guide and write the serial number in “For  
Your Records” on page 3. (See back of  
LCD display.)  
3. Turn ON LCD display and computer  
Turn ON the LCD display, then turn ON  
the computer. This sequence (LCD display  
before computer) is important.  
You can register your product online at the  
ViewSonic website for your region. See  
the Customer Support table in this guide.  
NOTE: Windows users may receive a  
message asking them to install the INF  
file. This is on the CD.  
The ViewSonic Wizard CD-ROM also  
provides an opportunity for you to print  
the registration form which you may mail  
or fax to ViewSonic.  
4. Insert the ViewSonic Wizard CD into  
the computer’s CD drive.  
Follow the on-screen instructions. If your  
computer does not have a CD-ROM drive,  
see “Customer Support” on page 15.  
Audio Cable  
DC IN  
D-SUB  
Power Code  
AC Outlet  
(Wall Socket)  
Computer Power Cord  
ViewSonic VA912  
5
 
Wall Mounting (Optional)  
To obtain a wall-mounting kit, contact ViewSonic® or your local dealer. Refer to the  
instructions that come with the base mounting kit. To convert your LCD display from a desk-  
mounted to a wall-mounted display, do the following:  
1. Verify that the Power button is turned Off, then  
Four VESA screw holes  
disconnect the power cord.  
2. Lay the LCD display face down on a towel or  
blanket.  
3. Remove the Plastic Covers from the back of the  
LCD display.  
4. Remove the four screws attaching the base.  
5. Remove the Rubber Plugs from inside the four  
VESA screw holes.  
6. Attach the mounting bracket from the VESA  
compatible wall mounting kit (100 mm x 100 mm  
distance).  
7. Attach the LCD display to the wall, following the  
instructions in the wall-mounting kit.  
ViewSonic VA912  
6
 
Using the LCD Display  
Setting the Timing Mode  
Setting the timing mode is important for maximizing the quality of the screen image and  
minimizing eye strain. The timing mode consists of the resolution (example 1280 x 1024) and  
refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the  
OSD (On-screen Display) controls to adjust the screen image.  
For the best picture quality set your LCD display timing mode to:  
VESA 1280 x 1024 @ 60Hz.  
To set the Timing Mode:  
1. Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the  
resolution.  
2. Set the refresh rate: See your graphic card's user guide for instructions.  
WARNING: Do not set the graphics card in your computer to exceed the maximum refresh  
rate of 75Hz; doing so may result in permanent damage to your LCD display.  
OSD and Power Lock Settings  
OSD Lock: Press and hold [1] and the up arrow S for 10 seconds. If any buttons are  
pressed the message OSD Locked will display for 5 seconds.  
OSD Unlock: Press and hold [1] and the up arrow S again for 10 seconds.  
Power Button Lock: Press and hold [1] and the down arrow T for 10 seconds. If the  
power button is pressed the message Power Button Locked will display for 5 seconds. With  
or without this setting, after a power failure, your LCD display’s power will automatically  
turn ON when power is restored.  
Power Button Unlock: Press and hold [1] and the down arrow T again for 10 seconds.  
ViewSonic VA912  
7
 
Adjusting the Screen Image  
Use the buttons on the front control panel to display and adjust the OSD controls which display  
on the screen. The OSD controls are explained at the top of the next page and are defined in  
“Main Menu Controls” on page 9.  
Main Menu  
with OSD controls  
Front Control Panel  
shown below in detail  
Scrolls through menu options and  
Displays the Main Menu or  
adjusts the displayed control.  
exits the control screen and  
Also a shortcut to display the Contrast  
adjustment control screen.  
saves adjustments.  
Displays the control screen  
for the highlighted control.  
Also toggles between two  
controls on some screens.  
Power light  
Audio Mute  
button turns  
the sound off  
Green = ON  
Orange = Power Saving  
Standby Power  
On/Off  
ViewSonic VA912  
8
 
Do the following to adjust the display setting:  
1. To display the Main Menu, press button [1].  
NOTE: All OSD menus and adjustment screens disappear automatically after about 15  
seconds. This is adjustable through the OSD timeout setting in the setup menu.  
2. To select a control to adjust, pressSorTto scroll up or down in the Main Menu.  
3. After the desired control is selected, press button [2]. A control screen like the one shown  
below appears.  
The command line at the bottom of the  
control screen tells what to do next from  
this screen. You can toggle between control  
screens, adjust the selected option, or exit  
the screen.  
4. To adjust the control, press the up S or down T buttons.  
5. To save the adjustments and exit the menu, press button [1] twice.  
The following tips may help you optimize your display:  
• Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to  
the LCD display. (Look for instructions on “changing the refresh rate” in your graphic  
card's user guide.)  
• If necessary, make small adjustments using H. POSITION and V. POSITION until the  
screen image is completely visible. (The black border around the edge of the screen should  
barely touch the illuminated “active area” of the LCD display.)  
ViewSonic VA912  
9
 
Main Menu Controls  
Adjust the menu items shown below by using the up S and down T buttons.  
Control  
Explanation  
Auto Image Adjust sizes and centers the screen image automatically.  
Contrast adjusts the difference between the image background (black level)  
and the foreground (white level).  
Brightness adjusts background black level of the screen image.  
Audio Adjust  
Volume increases the volume, decreases the volume, and mutes the audio.  
Mute temporarily silences audio output.  
Color Adjust provides several color adjustment modes, including preset color  
temperatures and a User Color mode which allows independent adjustment of  
red (R), green (G), and blue (B). The factory setting for this product is 6500K  
(6500 Kelvin).  
9300K-Adds blue to the screen image for cooler white (used in most office  
settings with fluorescent lighting).  
6500K-Adds red to the screen image for warmer white and richer red.  
5400K-Adds green to the screen image for a darker color.  
5000K-Adds blue and green to the screen image for a darker color.  
User Color Individual adjustments for red (R), green (G), and blue (B).  
1. To select color (R, G or B) press button [2].  
2. To adjust selected color, pressSandT.  
Important: If you select RECALL from the Main Menu when the product is  
set to a Preset Timing Mode, colors return to the 6500K factory preset.  
ViewSonic VA912  
10  
 
Control  
Explanation  
Information displays the timing mode (video signal input) coming from the  
graphics card in the computer, the LCD model number, the serial number, and  
the ViewSonic® website URL. See your graphics card’s user guide for  
instructions on changing the resolution and refresh rate (vertical frequency).  
NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution  
is 1280 x 1024 and the refresh rate is 60 Hertz.  
Manual Image Adjust Sub-menu  
H. Size (Horizontal Size) adjusts the width of the screen image.  
H./V. Position (Horizontal/Vertical Position) moves the screen image left or  
right and up or down.  
Fine Tune sharpens the focus by aligning text and/or graphics with pixel  
boundaries.  
NOTE: Try Auto Image Adjust first.  
Sharpness adjusts the clarity and focus of the screen image.  
ViewSonic VA912  
11  
 
Control  
Explanation  
Setup menu displays the menu shown below:  
Language Select allows the user to choose the language used in the menus and  
control screens.  
Resolution Notice allows the user to enable or disable this notice.  
If you enable the Resolution Notice shown above and your computer is set at a  
resolution other than 1280 x 1024, the following screen appears.  
OSD Position allows the user to move the OSD menus and control screens.  
OSD Timeout sets the length of time the OSD screen is displayed. For example,  
with a “30 second” setting, if a control is not pushed within 30 seconds, the  
display screen disappears.  
OSD Background allows the user to turn the OSD background On or Off.  
Memory Recall returns the adjustments back to factory settings if the display is  
operating in a factory Preset Timing Mode listed in the Specifications of this  
manual.  
ViewSonic VA912  
12  
 
Other Information  
Specifications  
LCD  
Type  
19” (full 19" viewable diagonal area),  
TFT (Thin Film Transistor), Active Matrix SXGA LCD,  
0.294 mm pixel pitch  
Color Filter  
RGB vertical stripe  
Glass Surface  
Anti-Glare  
Input Signal  
Video Sync  
RGB analog (0.7/1.0 Vp-p, 75 ohms)  
Separate Sync,  
f :30-82 kHz, f :50-85 Hz  
h
v
Compatibility  
Resolution  
PC  
Up to 1280 x 1024 Non-interlaced  
Power Macintosh up to 1280 x 1024  
1
Macintosh  
Recommended  
and supported  
1280 x 1024 @ 60, 70, 72 Hz  
1024 x 768 @ 60, 70, 72, 75, 85 Hz  
800 x 600 @ 56, 60, 72, 75, 85 Hz  
640 x 480 @ 60, 75, 85 Hz  
720 x 400 @ 70 Hz  
Power  
Voltage  
100-240 VAC, 50-60 Hz (auto switch)  
Display area  
Full Scan  
337.9mm (H) x 270.3mm (V)  
13.3" (H) x 10.64" (V)  
Operating  
conditions  
Temperature  
Humidity  
32° F to + 104° F (0° C to + 40° C)  
10% to 90% (no condensation)  
To 10,000 feet  
Altitude  
Storage  
Temperature  
Humidity  
-4° F to + 140° F (-20° C to + 60° C)  
10% to 90% (no condensation)  
To 40,000 feet  
conditions  
Altitude  
Dimensions  
Physical  
424 mm (W) x 384 mm (H) x 186 mm (D)  
16.7" (W) x 15.1" (H) x 7.3" (D)  
LCD display only  
424 mm (W) x 442 mm (H) x 68 mm (D)  
16.7" (W) x 17.4" (H) x 2.7" (D)  
Weight  
Physical  
12.1 lb (5.5 kg)  
Regulations  
BSMI, VCCI, CCC, PSB, C-Tick,  
CE, GS, Ergo, Gost-R/Hygienic, SASO, TCO'99,  
UL/cUL, FCC-B, ICES-B, NOM, TUV-S  
Power saving  
modes  
On  
Off  
Normal  
<3W  
(green LED)  
(orange LED)  
®
Preset Timing Mode (pre-adjusted to VESA 1280 x 1024 @ 60 Hz)  
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in  
permanent damage to the LCD display.  
1
®
Macintosh computers older than G3 require a ViewSonic Macintosh adapter. To order an adapter, contact  
ViewSonic.  
ViewSonic VA912  
13  
 
Troubleshooting  
No power  
• Make sure power button (or switch) is ON.  
• Make sure A/C power cord is securely connected to the LCD display.  
• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is  
supplying proper voltage.  
Power is ON but no screen image  
• Make sure the video cable supplied with the LCD display is tightly secured to the video  
output port on the back of the computer. If the other end of the video cable is not attached  
permanently to the LCD display, tightly secure it to the LCD display.  
• Adjust brightness and contrast.  
• If you are using an Macintosh older than G3, you need a Macintosh adapter.  
Wrong or abnormal colors  
• If any colors (red, green, or blue) are missing, check the video cable to make sure it is  
securely connected. Loose or broken pins in the cable connector could cause an improper  
connection.  
• Connect the LCD display to another computer.  
• If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.  
Control buttons do not work  
• Press only one button at a time.  
ViewSonic VA912  
14  
 
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
NOTE: You will need the product serial number.  
T = Telephone  
F = FAX  
Country/Region Website  
Email  
T= (800) 688 6688  
F= (909) 468 1202  
United States  
Canada  
T= (886) 463 4775  
F= (909) 468 1202  
T= (0800) 833 648  
F= +44 (0) 1293 643 910  
Europe, Middle  
East, Baltic  
countries, and  
(Contact your reseller)  
North Africa  
AUS= 1800 880 818  
NZ= 0800 008 822  
Australia and  
New Zealand  
Singapore,  
Southeast Asia, www.viewsonic.com.sg  
and India  
T=+ 65 273 4018  
F=+ 65 273 1566  
T=+886 (2) 2246 3456  
F=+886 (2) 8242 3668  
South Africa and  
other countries  
T=+886 (2) 2246 3456  
F=+886 (2) 8242 3668  
Hong Kong  
ViewSonic VA912  
15  
 
Cleaning the LCD Display  
• MAKE SURE THE LCD DISPLAY IS TURNED OFF.  
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.  
To clean the screen:  
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.  
2. If the screen still not clean, apply a small amount of non-ammonia, non-alcohol based glass  
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.  
To clean the case:  
1. Use a soft, dry cloth.  
2. If the case still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild  
non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.  
Disclaimer  
• ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the  
LCD display screen or case. Some chemical cleaners have been reported to damage the  
screen and/or case of the LCD display.  
• ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-  
based cleaners.  
ViewSonic VA912  
16  
 
Limited Warranty  
VIEWSONIC® LCD DISPLAY  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period.  
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its  
sole option, repair or replace the product with a like product. Replacement product or parts may include  
remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic LCD displays are warranted for three (3) years for all parts including the light source and three (3)  
years for all labor from the date of the first consumer purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Any damage of the product due to shipment.  
d. Removal or installation of the product.  
e. Causes external to the product, such as electrical power fluctuations or failure.  
f. Use of supplies or parts not meeting ViewSonic’s specifications.  
g. Normal wear and tear.  
h. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as "image burn-in" which results when a static image is  
displayed on the product for an extended period of time.  
4. Removal, installation, and set-up service charges.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need  
to provide your product's serial number.  
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b) your  
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or  
ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein including the  
implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable  
for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of  
use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with  
business relationships, or other commercial loss, even if advised of the possibility of such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
Effect of state law:  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or  
consequential damages, so the above limitations and exclusions may not apply to you.  
Sales outside the U.S.A. and Canada:  
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact  
ViewSonic or your local ViewSonic dealer.  
ViewSonic LCD Limited Warranty (V3.5)  
ViewSonic VA912  
17  
 
 

Team Products Drill CM9130 User Manual
Tektronix Sprinkler TDS 420 User Manual
Teledyne Carbon Monoxide Alarm M300E User Manual
TiVo DVR SDOC 00107 001 User Manual
Toshiba Computer Drive MK3252GSX User Manual
Toshiba Projector TDP PX10 User Manual
Tripp Lite TV Cables N820 05M User Manual
TV Ears Headphones TV Listening Device User Manual
Uniden Telephone UIP312 User Manual
ViewSonic Computer Monitor E92F+ User Manual