ViewSonic Digital Photo Frame VS13475 User Manual

- User Guide  
VFA724W / VFD824  
Digital Photo Frame  
- Guide de l’utilisateur  
- Bedienungsanleitung  
- Guía del usuario  
- Käyttöopas  
- Руководство пользователя  
- Kullanιcι kιlavuzu  
- Οδηγός χρηστών  
Model No.: VS13471  
VS13475  
 
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the  
European Parliament and the Council on restriction of the use of certain hazardous substances in  
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum  
concentration values issued by the European Technical Adaptation Committee (TAC) as shown  
below:  
Proposed Maximum  
Substance  
Actual Concentration  
Concentration  
Lead (Pb)  
0.1%  
< 0.1%  
< 0.1%  
< 0.01%  
< 0.1%  
< 0.1%  
< 0.1%  
Mercury (Hg)  
Cadmium (Cd)  
0.1%  
0.01%  
0.1%  
6+  
Hexavalent Chromium (Cr  
)
Polybrominated biphenyls (PBB)  
0.1%  
Polybrominated diphenyl ethers (PBDE)  
0.1%  
Certain components of products as stated above are exempted under the Annex of the RoHS  
Directives as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not  
specifically mentioned in the Annex of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic  
ceramic parts (e.g. piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more  
lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing  
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.  
ViewSonic  
2
VFA724W_VFD824  
 
Copyright Information  
©
Copyright ViewSonic Corporation, 2010. All rights reserved.  
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks  
of ViewSonic Corporation.  
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or  
omissions contained herein; nor for incidental or consequential damages resulting from furnishing  
this material, or the performance or use of this product.  
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to  
change product specifications without notice. Information in this document may change without  
notice.  
No part of this document may be copied, reproduced, or transmitted by any means, for any  
purpose without prior written permission from ViewSonic Corporation.  
For Your Records  
Product Name:  
VFA724W / VFD824  
ViewSonic Digital Photo Frame  
Model Number:  
Document Number:  
Serial Number:  
Purchase Date:  
VS13471 / VS13475  
VFA724W_VFD824_UG_ENG Rev. 1B 04-21-10  
_______________________________________  
_______________________________________  
Product disposal at end of product life  
ViewSonic is concerned about the preservation of our environment. Please dispose of this product  
properly at the end of its useful life. Your local waste disposal company may provide information  
about proper disposal.  
ViewSonic  
3
VFA724W_VFD824  
 
Important Safety Instructions  
Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce  
the risk of fire, electric shock, and injury.  
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture  
Warning: To prevent the risk, do not remove the cover, there are no spare parts inside, refer all product  
services to professional personnel.  
Digital Photo frame is for indoor use only.  
Unplug Digital Photo frame before performing care and maintenance.  
Do not block the ventilation holes on the back of Digital Photo Frame at any time.  
Keep your Multimedia Digital Photo Frame out of direct sunlight and heat source.  
Protect the power cord. Route power cords appropriately to avoid trip over by someone else or  
pinched by items placed on or against them. Pay particular attention to the point where the cord  
attaches to Digital Photo Frame.  
Only use the AC adapter included with the Digital Photo Frame. Using any other power adapter  
will void your warranty.  
Unplug the power cord from the outlet when the unit is not in use.  
Cleaning LCD Screen  
Treat the screen gently. The screen is made of glass which can be scratched or damaged  
To clean fingerprints or dust from the LCD screen, we recommend using a soft / nonabrasive cloth such as  
a camera lens cloth to clean the LCD screen.  
I you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the LCD screen.  
Clean the LCD screen with cleaning cloth moistened with the liquid.  
Clean Digital Photo Frame  
Clean outer surface of Digital Photo Frame (excluding the screen) with a soft cloth dampened with water.  
Package Content  
Digital Photo Frame  
AC power adapter  
This User Guide  
Quick Start Guide  
ViewSonic  
4
VFA724W_VFD824  
 
Identify the Parts  
Button  
Action  
Move the selection up or left, display the previous photo, or select the previous file  
ENTER Select the highlighted option, start a Slide Show , Pause or Play  
Move the selection down or right, display the next photo or select the next file.  
EXIT  
Menu  
Exit the current display, or go back a screen.  
Into the OSD Menu Mode  
Power(On/Off)  
Setup Up the Digital Photo Frame  
The Digital Photo Frame is easy to set up. Just follow these steps:  
1. Plug the AC Power Adapter into the Digital Photo Frame and into a wall outlet.  
2. Insert a memory card into appropriate slot.  
Secure Digital™ or MultiMedia Card™, Memeoy Stick™, MemoryStick Pro™, Memory  
Stick Pro Duo™, Memory Stick Pro Duo™, xD Picture Card™.  
3. Pull out adjustable Stand to adjust view angle.  
Note: The card will only fit in one direction; do not force it. The card should fit snugly  
when properly inserted.  
4. Press the Power Button on the back of the Digital Photo frame ON. The Digital Photo  
frame will automatically start a slide show of the photo on the card.  
5. To display photos individually, press the EXIT button to open the Thumbnails Screen.  
Use the Up and Sown arrows to choose a Photo. Press the Play button ( ) on the top of  
the Digital Photo frame, or the Enter button on the remote control.  
Note: Pull the plastic tab sticking out of the remote control. It protects the battery, and  
the remote control will not work unless it is removed.  
6. To restart the Slide Show, press the Play button ( ) again, or press the Slide Show  
button on the remote control.  
ViewSonic  
5
VFA724W_VFD824  
 
Setting Up the Slideshow  
You can control all Digital Photo Frame functions with the buttons on the top of the Digital Photo  
Frame or with the remote control. To display the setup screen, simply hold down the Exit button  
for a second or press the Setup button on the remote control.  
Card Selection Screen  
Use the Card Selection menu to choose between memory card and USB Drive.  
1. To open the card select menu, either insert a new card or press the Exit button repeatedly  
to back through the screens until you see it.  
2. Press the left and Right arrows to select the desired memory card.  
3. Press Enter to make the selection. The Mode Selection Screen opens.  
Display a Single Photo on Full Screen  
You can choose a single photo to display, without slideshow  
1. With Thumbnail screen displayed, press Enter to display the selected photo on the full  
screen.  
2. Press the Left Arrow to return to the previous photo.  
3. Press the Right Arrow to display the next photo  
4. To return to the Thumbnail secren, press the Exit button.  
ViewSonic  
6
VFA724W_VFD824  
 
Setting Viewing Options  
You can control all of the viewing options in the Setup menu using the buttons on the top of the frame.  
1. To show the Setup menu, Press the Exit button until Select Mode or Select Card screen  
shows, then press Setup button.  
2. With the Setup menu open, use the Up and Down arrows to choose a display option.  
3. Press Enter to select the option. A second menu opens, listing the available settings. A  
white square shows the current setting.  
4. Use the Up and down arrows to choose the desired setting.  
5. Press Enter to select the setting. The white square moves to the selected setting.  
6. You can make as many changes as you wish in the same manner. When you are finished,  
press the Exit button to close the Settings Menu.  
7. The Following table lists the display options in the Setup Menu, their options, and a  
description of their actions.  
Display Option  
Settings  
English  
Francais  
Spanish  
ON  
Description  
Supports 3 languages  
Language  
Magic Window  
Display 4 pictures in Slide Show  
OFF  
The Digital Photo Frame can optimize  
your photos to display on the screen  
Display Image Size  
Original/Optimal  
Normal  
Random  
Fade  
Curtain  
Open_Door  
Cross_Comb  
Fast  
Medium  
Slow  
Special effects shown to transition from  
one photo one photo to the next in a Slide  
Show  
Slideshow Transition  
Determines how quickly the next photo is  
displayed  
Slideshow Speed  
Slideshow shuffle  
ON/Off  
Display photos randomly  
2 Hours  
4 Hours  
8 Hours  
No Power Saving  
The Digital Photo Frame will turn itself  
off after the specified period of time  
Power saving  
Immediately rest all settings to the factory  
defaults. There is no warning message.  
-
Factory default  
ViewSonic  
7
VFA724W_VFD824  
 
Technical Specification  
VFA724W (17.8cm/7.0” LCD Screen Digital Photo Frame)  
VFD824 (20.3cm/8.0” LCD Screen Digital Photo Frame)  
Product  
VFA724W 480 x 234 pixels  
Resolution  
VFD824  
800 x 600 pixels  
Secure Digital™, MultiMedia Card™, Memory Stick Pro Duo™,  
Memory Stick Duo™  
Memory Card Format  
File Format  
Standard JPEG  
Slideshow mode  
Multiple transitional Style for Slideshow  
Variable Speed for Slide Show  
Feature  
Four Position Adjustable Stand for optimum view angle  
USB Port  
USB 2.0 (Host)  
Power Adapter Input  
100V-240V AC, 50~60Hz  
VFA724W 5V DC, 1A  
Power Adapter output  
VFD824  
5V DC, 2A  
ViewSonic  
8
VFA724W_VFD824  
 
Customer Support  
For technical support or product service, see the table below or contact your reseller.  
Note: You will need the product serial number.  
Country/  
Region  
T=Telephone  
F=Fax  
Web Site  
E-mail  
Australia/New  
Zealand  
AUS=1800 880 818  
NZ=0800 008 822  
T (Toll-Free)= 1-866-463-4775  
T (Toll)= 1-424-233-2533  
F= 1-909-468-3757  
Canada  
Europe  
Hong Kong  
India  
T= 852 3102 2900  
T= 1800 11 9999  
com/uk/  
Ireland (Eire)  
Korea  
support/call-desk/  
com  
T= 080 333 2131  
Latin America  
(Argentina)  
T= 0800-4441185  
T=1230-020-7975  
T= 01800-9-157235  
T= 001-8882328722  
Latin America  
(Chile)  
Latin America  
(Columbia)  
Latin America  
(Mexico)  
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS  
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16  
Latin America  
(Peru)  
T= 0800-54565  
Macau  
ap.viewsonic.com/me/  
T= 853 2870 0303  
Middle East  
Contact your reseller  
T= 1-800-688-6688 (English)  
T= 1-866-379-1304 (Spanish)  
F= 1-909-468-3757  
Puerto Rico &  
Virgin Islands  
Singapore/  
Malaysia/  
Thailand  
ap.viewsonic.com/za/  
T= 65 6461 6044  
South Africa  
Contact your reseller  
United  
Kingdom  
com/uk/  
support/call-desk/  
viewsoniceurope.com  
T (Toll-Free)= 1-800-688-6688  
T (Toll)= 1-424-233-2530  
F= 1-909-468-3757  
United States  
ViewSonic  
9
VFA724W_VFD824  
 
Limited Warranty  
VIEWSONIC Digital Photo Frame  
What the warranty covers:  
ViewSonic warrants its products to be free from defects in material and workmanship, under normal  
use, during the warranty period. If a product proves to be defective in material or workmanship during  
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.  
Replacement product or parts may include remanufactured or refurbished parts or components.  
How long the warranty is effective:  
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer  
purchase.  
Who the warranty protects:  
This warranty is valid only for the first consumer purchaser.  
What the warranty does not cover:  
1. Any product on which the serial number has been defaced, modified or removed.  
2. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product  
modification, or failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by ViewSonic.  
c. Causes external to the product, such as electric power fluctuations or failure.  
d. Use of supplies or parts not meeting ViewSonic’s specifications.  
e. Normal wear and tear.  
f. Any other cause which does not relate to a product defect.  
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static  
image is displayed on the product for an extended period of time.  
How to get service:  
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please  
refer to Customer Support page). You will need to provide your product’s serial number.  
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your  
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.  
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service  
center or ViewSonic.  
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.  
Limitation of implied warranties:  
There are no warranties, express or implied, which extend beyond the description contained herein  
including the implied warranty of merchantability and fitness for a particular purpose.  
Exclusion of damages:  
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be  
liable for:  
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,  
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,  
interference with business relationships, or other commercial loss, even if advised of the possibility of  
such damages.  
2. Any other damages, whether incidental, consequential or otherwise.  
3. Any claim against the customer by any other party.  
4.3: ViewSonic DPF Warranty  
DPF_LW01 Rev. 1A 06-20-08  
ViewSonic  
10  
VFA724W_VFD824  
 
 

Toastmaster Oven TOV2W T User Manual
Toshiba Personal Computer A3X User Manual
Toshiba Power Supply G9000 User Manual
Trane Marine Sanitation System BAS SVU23B EN User Manual
TRENDnet Network Card HS 6038 User Manual
TRENDnet Switch TK 207K User Manual
Tripp Lite TV Cables EZB DVIM 2 User Manual
Viking Ventilation Hood DIPR User Manual
Vivitar Camera Lens VIV 35MM C User Manual
Waring Waffle Iron WMK600 User Manual