- User Guide
®
ViewSonic
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Kullanιcι kιlavuzu
- Gebruikshandleiding
- Pyководство пользователя
- 使用手冊 (繁體)
3DPF8
3D Digital Photo Frame
- 使用手册 (简体)
- 사용자 안내서
- ユーザーガイド
-
ﺍﻠﻤﺴﺘﺨﺪﻢ ﺪﻠﻴﻞ Model No. : VS13808
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
6. Clean with a soft, dry cloth.
7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience
receptacles and the point where they exit from the unit. Be sure that the power outlet is located
near the unit so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the unit. When a cart is used, use caution when moving the cart/unit
combination to avoid injury from tipping over.
13. Unplug this unit when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been
damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled
onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not
operate normally or has been dropped.
15. Caution: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
16. Only use battery packs approved by the manufacturer or else damage may occur.
ViewSonic
ii
3DPF8
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Proposed Maximum
Concentration
Substance
Actual Concentration
Lead (Pb)
0.1%
< 0.1%
< 0.1%
< 0.01%
< 0.1%
Mercury (Hg)
0.1%
Cadmium (Cd)
0.01%
6+
Hexavalent Chromium (Cr
)
0.1%
Polybrominated biphenyls
(PBB)
0.1%
0.1%
< 0.1%
< 0.1%
Polybrominated diphenyl ethers
(PBDE)
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic
iii
3DPF8
Copyright Information
Copyright © ViewSonic® Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this
material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may
mail or fax to ViewSonic.
For Your Records
Product Name:
3DPF8
ViewSonic 3D Digital Photo Frame
VS13808
3DPF8_UG_ENG Rev. 1A 09-24-10
_______________________________
_______________________________
Model Number:
Document Number:
Serial Number:
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you for
being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
ViewSonic
iv
3DPF8
Table of Contents
Introduction..................................................................... 1
Features................................................................................................ 1
Package Contents ................................................................................ 2
Remote Control..................................................................................... 2
Getting Started................................................................ 3
Picture Frame Overview....................................................................... 3
General Use..................................................................... 4
Base Installation ................................................................................... 4
Operation.............................................................................................. 4
Power on/off your picture frame............................................................ 4
Insert memory card............................................................................... 4
Operations and Functions............................................. 5
Main Menu............................................................................................ 5
Photo Mode .......................................................................................... 5
Configuring the Photo View Settings .............................................. 6
Video Mode........................................................................................... 7
Configuring the Video Playback...................................................... 7
Music Mode .......................................................................................... 8
Configuring the Music Playback ..................................................... 8
Time/Date mode ................................................................................... 9
Storage mode....................................................................................... 10
SETUP MENU ...................................................................................... 10
Connecting...................................................................... 11
Connecting to PC.................................................................................. 11
Specifications................................................................. 12
Troubleshooting ............................................................. 13
ViewSonic
v
3DPF8
Introduction
Features
●
●
●
●
●
●
●
●
●
●
●
●
Bright 8” (4:3) high-resolution color 3D TFT LCD panel
Easy to transfer 2D photo and video into to 3D automatically
Compatible with ViewSonic 3DV5 3D camcorder and 3DSC5 3D camera
Auto slideshow with your personal MP3 music in the background
Quickly play video file of MPEG 4 format
Built-in battery for portable usage
Compatible with USB flash drive and SD/SDHC/MMC
Built-in speaker for music playback
Direct USB connection to your PC for easy file transfers
Clock, alarm and date functions
Automatic Power Off
Custom alarm clock settings - wake up to your favorite MP3 song
1. The screen is very delicate and can be damaged by pressing on it with
excessive force.
2. Use a soft non-abrasive cloth, such as for cleaning camera lenses to gently
wipe the screen.
ViewSonic
1
3DPF8
Package Contents
Please check that the package contains the following items:
Picture frame
CD
Quick Start Guide
USB Cable
Power Adapter
Remote control
In case the package content is not complete, please contact your dealer immediately.
Remote Control
Press Power button on the remote control pointing at the remote control sensor of this
unit.
Power On/Off
Menu Button
Return Button
Enter/Play/Pause
Directional Buttons
Volume Down
Volume Up
ViewSonic
2
3DPF8
Getting Started
Picture Frame Overview
Navigation button
Volume Button
IR receiver
OK/Play/Pause button
Return Button
Menu Button
Power On/Off
SD Card Slot
USB Connector
LED
DC-In
Speaker
Reset
DC power jack/USB
connector for PC
Stand
ViewSonic
3
3DPF8
General Use
Base Installation
In the Photo Frame back, pull the stand out of the slot.
After a “stuck” sound, lift the stand by turning 45°. Then
the installation is complete.
Operation
Before you can use the picture frame, it has to be
connected to the power supply. Plug the connection
cable of the power adapter into the respective plug of
the picture frame and plug the power adapter into a wall
outlet .
Power on/off your picture frame
To power on the photo frame, please press the Power button
longer than 3 seconds. To power off the photo frame, please press
the Power button again.
The green indicator light will light up and the device will show the
ViewSonic screen.
Again press the Power power button on the side of Photo Frame, or press
on the remote control. The indicator light will turn off.
[Note] The Power key on remote controller can switch the set between On
and Standby mode only when the Photo frame is activated by the Power
button at the side of frame.
Insert memory card and USB drive
Push the memory card (not included) gently into the
respective card slot until it stops. When inserting a SD/
SDHC/MMC card, make sure that the contacts show to the
back. You can also insert USB drive into USB slot instead.
ViewSonic
4
3DPF8
Operations and Functions
Main Menu
When you power on the 3D Digital Photo Frame, you will see the Main Menu appearing on
the screen, which allows you to quick access the PHOTO, VIDEO, MUSIC, TIME/DATE,
STORAGE, and SETUP functions.
This chapter will guide you through how to use these functions of the device.
Photo Mode
1. On the Main Menu, select the PHOTO item and press OK to enter the Thumbnail
Mode. You can browse the thumbnails of all photos.
2. Use the Navigation buttons to navigate through the pictures.
3. Press OK on the selected thumbnail to view the picture in single view mode.
4. While viewing a picture, you can return to the Thumbnail Mode by simply pressing
Return.
5. In the Thumbnail Mode, you can:
●
●
press Return to Main Menu; or
press Menu to enter the Photo Menu.
Thumbnail Mode
ViewSonic
5
3DPF8
PHOTO MENU
PHOTO MENU allows you to configure the settings while viewing pictures, such
as slide show speed, picture mode, background music playback, etc. See the
next section for detailed information on configuring the settings.
Configuring the Photo View Settings
On the Photo List screen, press Menu button to enter the Photo MENU.
Setting
Available Options
Slide show speed
Select the interval time between the pictures during the slide
show: OFF, 5 sec, 10 sec, 15 sec, 30 sec, 1 min, 5 min, 10
min, 30 min, 1 hour, 4 hour, 8 hour or 12 hour.
Slide show mode
●
Folder - Start slide show of the pictures in the selected
folder.
●
●
All - Start slide show of all pictures in the device.
Shuffle - Display the pictures randomly during slide show
playback.
Picture Mode
●
●
Auto Fit - The selected picture will be displayed to fit the
screen size automatically.
Full Screen - The selected picture will be displayed in full
screen mode.
Background Music
●
●
●
Off - Disable music playback during slide show.
All - Play all music files during slide show.
Album - Play the music files in the selected album during
slide show.
●
●
Shuffle - Play music randomly during slide show.
Single - Play music in order during slide show.
ViewSonic
6
3DPF8
Video Mode
1. On the Main Menu, select the VIDEO item and press OK to display the Video List.
You can browse the list of all video files.
2. Use the Navigation buttons to navigate through the video files.
3. Press OK to start playing the video in full screen mode.
4. Simply press Return button to stop the video playback. Then you can select next
video to play.
Video List
Configuring the Video Playback
On the Video List screen, press Menu to enter the VIDEO MENU.
Setting
Description
Folder
All
Start playback of the videos in the selected folder.
Start playback of all videos in the device.
ViewSonic
7
3DPF8
Music Mode
1. On the Main Menu, select the MUSIC item and press OK to display the Music List.
You can browse the list of all music files.
2. Use the Navigation buttons to navigate through the music files.
3. Press OK to start playing the music.
4. To stop the music playback and return to Music List, simply press Return. Then you
can select next music to play.
Music List
Configuring the Music Playback
On the Music List screen, press Menu to enter the MUSIC MENU.
Setting
Option
All
Description
Play Mode
Start playback of all music files in the device.
Album
Start playback of the music files in the selected
album.
Shuffle
Single
Play music randomly.
Play music in order.
Save as the
sound of alarm
Alarm
1~4
Set the selected music file as the sound of alarm
of the system.
ViewSonic
8
3DPF8
Time/Date mode
On the Main Menu, select the TIME/DATE item and press OK to set the date and time for
the system. In addition, you can set up to four alarms for the system.
Setting
Description
Time
Date
Use the Navigation buttons UP / Down to set the correct
time settings.
Select the date format (M/D/Y, Y/M/D, or D/M/Y. M: month,
D: day, Y: year) and then use the Navigation buttons UP /
Down / Left / Right to set the correct date settings.
Alarm
Select the alarm item (1~4) and then complete the required
settings:
●
●
ON/OFF - Enable or disable the alarm.
Time - Use the Navigation buttons UP / Down / Left /
Right to set the alarm time.
●
Repeat - Select the repeat time for the alarm.
If there is any inconsistency on time settings, the message “Conflict setting” will
appear on the screen.
ViewSonic
9
3DPF8
Storage mode
On the Main Menu, select the STORAGE item and press OK to select the storage media:
SD/SDHC/MMC card, USB device, or Internal memory.
Setting
SD/MMC
Description
Select the inserted SD/MMC card as the storage media.
Select the connected USB device as the storage media.
Select the internal memory as the storage media.
USB
Internal Memory
SETUP MENU
On the Main Menu, select the SETUP item and press OK to customize your 3D Digital
Photo Frame.
Setting
Language
Description
Choose the preferred language for the system.
You can set this setting as Auto Off.
Auto Off
Icon
Enable or disable the icon for the system.
Adjust the brightness level of the LCD screen.
Adjust the contrast level of the LCD screen.
Select to restore the factory default settings.
Brightness
Contrast
Default
ViewSonic
10
3DPF8
Connecting
Connecting to PC
For copying data into the internal memory, you can
connect the 3D Digital Photo Frame via the USB
connection directly with the PC. Use the supplied USB
cable and your PC, then turn it on by pressing POWER
button at the side. Now, all necessary system drivers are
installed and after a few seconds, a popup window will
appear and display that the device can be used as the
data storage.
To PC/NB
To Photo
frame DC in
ViewSonic
11
3DPF8
Specifications
Item
Description
Panel
Panel size: 8”
Panel resolution: 800 x 600
3D display format
Photo: Support original 3D photo side by side
format (*.JPG)
Video: Support original 3D video “side by side”
clip with *.MP4 (MPEG H.264)
Max. Video Resolution: up to 720P/30fps.
Photo
Video
Photo format: JPEG
Max. resolution: 16 Megapixel
Auto slide show: Yes
Video format: *.MP4 (H.264)
Clip: Up to 720P/30fps *.MP4 (H.264)
Audio
Audio format: MP3
Functions
Background music: Yes
Speaker: Yes
Date: Yes
Calendar: Yes
Alarm: Yes
Auto off: Yes
Storage
Internal memory: 128MB
External memory card: SD/SDHC/MMC (up
to 32GB)
USB flash drive: Yes (USB 2.0 host & slave)
Power
External Power Supply: AC 100~240V, 50~60
Hz, 5V, 2A
Battery
Rechargeable Li-polymer 1200mAH,
embedded
ViewSonic
12
3DPF8
Troubleshooting
Problem
Cause
Solution
Power indicator is
not lit.
Power is off or
power indicator is
broken.
Check whether the AC adapter is
well connected and power supply
is normal.
No start-up
interface.
AC adapter is not
well connected or
does not power on
normally.
Check whether the AC adapter
is well connected and make sure
the photo frame is powered on
normally.
Can see start-up
clock, but could not
play (when a card
or USB drive is
present).
Card is not
Insert the card correctly; format
the card before copy files, or
replace with a new card.
correctly inserted
or card is corrupt
or not fully
compatible.
The order of image
files is not what I
wanted.
The order of files
is sorted by file
name. Numbers
have higher priority
than alphabets.
Rename the files.
Since there are many brands of memory cards, please test the compatibility on
the spot when you purchase the memory cards. This digital photo frame could
not support pirate cards. If the memory card is correctly inserted, and the start-
up interface is displayed but the photo frame can not read the card, please turn
off and restart the photo frame, or format the card and re-copy files.
ViewSonic
13
3DPF8
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note : You will need the product serial number.
T = Telephone
F = FAX
Country/Region
Website
Email
Australia/New
Zealand
AUS= 1800 880 818
NZ= 0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
Canada
Europe
Hong Kong
India
T= 852 3102 2900
T= 1800 11 9999
uk/support/call-desk/
service_ie@
viewsoniceurope.com
Ireland (Eire)
Korea
T= 080 333 2131
T= 0800-4441185
T= 1230-020-7975
T= 01800-9-157235
Latin America
(Argentina)
Latin America
(Columbia)
Latin America
(Mexico)
T= 001-8882328722
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16
T= 0800-54565
Macau
ap.viewsonic.com/me/
T= 853 2870 0303
Contact your reseller
Middle East
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
Puerto Rico & Virgin
Islands
Singapore/Malaysia/
Thailand
ap.viewsonic.com/za/
T= 65 6461 6044
South Africa
Contact your reseller
uk/support/call-desk/
service_gb@
viewsoniceurope.com
United Kingdom
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
United States
ViewSonic
14
3DPF8
Limited Warranty
ViewSonic® Digital Photo Frame
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship
during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a
like product. Replacement product or parts may include remanufactured or refurbished parts or
components.
How long the warranty is effective:
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer
purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1.
2.
Any product on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
b. Any damage of the product due to shipment.
c. Removal or installation of the product.
d. Causes external to the product, such as electrical power fluctuations or failure.
e. Use of supplies or parts not meeting ViewSonic’s specifications.
f.
Normal wear and tear.
g. Any other cause which does not relate to a product defect.
3.
4.
Any product exhibiting a condition commonly known as “image burn-in” which results when a
static image is displayed on the product for an extended period of time.
Removal, installation, one way transportation, insurance, and set-up service charges.
How to get service:
1.
2.
For information about receiving service under warranty, contact ViewSonic Customer Support
(please refer to Customer Support page). You will need to provide your product’s serial
number.
To obtain warranted service, you will be required to provide (a) the original dated sales slip,
(b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of
the product.
3.
4.
Take or ship the product freight prepaid in the original container to an authorized ViewSonic
service center or ViewSonic.
For additional information or the name of the nearest ViewSonic service center, contact
ViewSonic.
ViewSonic
15
3DPF8
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall
not be liable for:
1.
Damage to other property caused by any defects in the product, damages based upon
inconvenience, loss of use of the product, loss of time, loss of profits, loss of business
opportunity, loss of goodwill, interference with business relationships, or other commercial
loss, even if advised of the possibility of such damages.
2.
3.
4.
Any other damages, whether incidental, consequential or otherwise.
Any claim against the customer by any other party.
Repair or attempted repair by anyone not authorized by ViewSonic.
4.3: ViewSonic DPF Warranty
DPF_LW01 Rev. 1A 06-20-08
ViewSonic
16
3DPF8
|